News:

New forum software.

Check your settings.

Several themes available under "Look and Layout"



Recent posts

#91
For Sale & Wanted / Re: I Have a Fever! And the On...
Last post by Fins - January 17, 2021, 08:14:25 PM
I had a 1962 Buick 265 V-6 in a boat that me and a buddy owned. That was one little engine with a s-load of torque. It was in a 24' boat mated to an OMC intermediate housing and outdrive. It loved to eat head gaskets. We pulled the engine in a shop that I was a manager of and sent it out. The machine shop planed the heads, decked the block and bored the cylinders .030 over. After that, it ran perfectly. Smooth at an idle and really came on at 4500-5000 rpm's. 

When we we were out in the ocean and a head gasket blew, it would fill the engine with sea water. IIRC, it would blow that little section in between 2 of the cylinders where the stainless steel ring was. We just kept on with it to get to the dock. It never left us stranded anywhere. The bilge was a real mess after an incident like that. Oily water everywhere. We finally gave it up when the outdrive was stolen off of the back while sitting in my front yard. We pulled the engine and sold it and scrapped the rest.
#92
For Sale & Wanted / Re: I Have a Fever! And the On...
Last post by Otto Skorzeny - January 17, 2021, 07:28:03 PM
Yes, I've been reading up on that. Similar to Harley Davidson.

It's really funny.

Kaiser Jeep started using the V6 under license in 1965. In 1967 GM says everybody wants muscle cars and big engines. Nobody even knows what a V6 is so they sell all the manufacturing equipment to Kaiser Jeep.

Ten years later GM is developing their new small cars and need a V6. Meanwhile, Kaiser Jeep was bought by AMC. AMC looks at the V6 and one of it's executives says it was "rougher than a cob!"   Amc says screw that we're going to use our own inline six and stops production of the V6.

The Buick design team actually went to a junk yard and pulled out a Dauntless engine from a wrecked Jeep and put it in the car they were developing.  It was a perfect match and they went to HQ to see about buying engines from AMC.

AMC told GM that the per unit costs were going to be too high to make restarting production feasible.  GM then asked if they could buy back the rights to the engine and all of the equipment.

AMC said sure, knock yourself out.

Fortunately GM had't destroyed the factory  in Flint where the engines used to be made.  All of the original mounting points and whatnot were still in place.  They were able to move AMC entire factory and set it up without having to waste time and money on the particulars.  Supposedly that saved GM 2 years of production time.



#93
For Sale & Wanted / Re: I Have a Fever! And the On...
Last post by classic cruiser - January 17, 2021, 06:55:00 PM
Quote from: Otto Skorzeny on January 17, 2021, 03:25:41 AM
Why "shaker" ? Is it known for being not so smooth?

The firing order on the Buick V6 was not every 90 degrees.
#94
For Sale & Wanted / Re: I Have a Fever! And the On...
Last post by Otto Skorzeny - January 17, 2021, 03:25:41 AM
Why "shaker" ? Is it known for being not so smooth?

Funny. I just looked up info on the engine and it said that Kaiser-Jeep put a heavier flywheel on it to dampen vibration!

Hahaha! What's funnier is that GM sold it to Kaiser-Jeep thinking nobody needed a V6 in the muscle car era. A few years later during the energy crisis they had to buy back their own design form AMC!

Gotta hand it to the General.  Money can buy a lot of things except common sense.
#96
For Sale & Wanted / Re: I Have a Fever! And the On...
Last post by Otto Skorzeny - January 17, 2021, 01:55:02 AM
removed!!  sOMEBODY JUST BOUGHT IT!!!!!
#97
For Sale & Wanted / Re: I Have a Fever! And the On...
Last post by Otto Skorzeny - January 17, 2021, 12:46:14 AM
Quote from: Carfreak on January 16, 2021, 11:45:46 PM
But its not yellow   :scratchhead:

If it were yellow I'd already be on a plane!
#98
For Sale & Wanted / Re: I Have a Fever! And the On...
Last post by Otto Skorzeny - January 16, 2021, 11:58:26 PM
I know!

I passed up a beautiful, fully restored orange one about  15 years ago for sale in Oregon. It had a black convertible top and beautiful plaid upholstery. It was $14,000 then.

In any event, I would fly out there and drive the 2500+ miles home. I don't know anything about the AMC Dauntless V6 or what kind of automatic transmission they use or thier overall reliability, 4 wd, etc.

I'd stop in Santa Rosa 60 miles away at my friend's newly rebuilt home and do whatever basic stuff it needed for a 2500 mile journey. I figure if Jon can do a 1000 mile journey to Canada in a 22 year old car, I ought to be able to do a 2500 mile journey in a 52 year old car, right?!

That's weird. A car from the 60s doesn't really seem like an "old" car to me. I guess because they're pretty modern by that era.

Denrep, you know everything about every engine/trans ever made. What's the deal with AMC stuff of this era?
#99
For Sale & Wanted / Re: I Have a Fever! And the On...
Last post by Carfreak - January 16, 2021, 11:45:46 PM
But its not yellow   :scratchhead:
#100
For Sale & Wanted / I Have a Fever! And the Only C...
Last post by Otto Skorzeny - January 16, 2021, 11:28:42 PM
Should I buy this truck?  Whoever painted it was an idiot but...

I've always loved these. Fly to Cali and drive it home?

https://www.ebay.com/itm/1969-Jeep-Jeepster/264995310579?hash=item3db2f38bf3:g:lnYAAOSweAlf7MVy